Hanger machines are relatively rare in our lives. But hangers are something we need to touch every day, and there is also a great demand in each of us. Hangers are also made and removed. With the development of our modern technology, we have a lot of machinery in our lives. We all know that there are certain things that need attention when using machinery. The machine is the same, let's take a look at what matters need to pay attention to?
1. Correct device placement:
After placing in the workshop, a sufficient ground wire is required for grounding. During the transportation process, consumer manufacturers have wooden boards at the bottom. They need to remove the wooden boards and put on rubber pads. The purpose of this is to avoid machine consumption during the process, which will not be caused by the machine. The table is shaken during operation.
2. Regularly add oil and butter:
The refueling position is mainly the center of the curl, wire feed box, and transmission gear. The long-term adherence to the smooth running of the organic part of the machine, usually check the butter once a week;
Third, adhere to the cleaning of the wire forming machine:
Every day before work, employees need to wipe the machine's appearance clean. If it is not cleaned for a long time, oil will accumulate, there will be the possibility of altering the circuit parameters, and the long-term corrosion of dust will make the machine's appearance aging and affect the appearance;
Fourth, normal operation and use:
Pay special attention not to consume products beyond the wire diameter range as much as possible, so as not to reduce the accuracy of the equipment. The wire forming machine needs to be placed in the ventilated and boring center to avoid moisture and rust or damage the circuit.
1. Correct device placement:
After placing in the workshop, a sufficient ground wire is required for grounding. During the transportation process, consumer manufacturers have wooden boards at the bottom. They need to remove the wooden boards and put on rubber pads. The purpose of this is to avoid machine consumption during the process, which will not be caused by the machine. The table is shaken during operation.
2. Regularly add oil and butter:
The refueling position is mainly the center of the curl, wire feed box, and transmission gear. The long-term adherence to the smooth running of the organic part of the machine, usually check the butter once a week;
Third, adhere to the cleaning of the wire forming machine:
Every day before work, employees need to wipe the machine's appearance clean. If it is not cleaned for a long time, oil will accumulate, there will be the possibility of altering the circuit parameters, and the long-term corrosion of dust will make the machine's appearance aging and affect the appearance;
Fourth, normal operation and use:
Pay special attention not to consume products beyond the wire diameter range as much as possible, so as not to reduce the accuracy of the equipment. The wire forming machine needs to be placed in the ventilated and boring center to avoid moisture and rust or damage the circuit.
Comments
Post a Comment